A newer version of this documentation is available.

View Latest

Migrating to SDK API 3

  • concept
    +
    The SDK API 3 (used in Node.js SDK 3.x and 4.x) introduces breaking changes to the previous SDK API 2 APIs (used in Node.js SDK 2.x) in order to provide a number of improvements. Collections and Scopes are introduced. The Document class and structure has been completely removed from the API, and the returned value is now Result. Retry behavior is more proactive, and lazy bootstrapping moves all error handling to a single place.

    The current Node.js SDK 4.0 is also based on the SDK API 3.2 specification, and offers an entirely new backend (couchbase++) with better support for upcoming features like Distributed ACID Transactions. We have increased the major version to reflect the importance of this implementation change as per semantic versioning.

    The intent of this migration guide is to provide detail information on the changes and what to look for while upgrading the SDK.

    if you are an existing Node.js SDK 3.x user considering migrating to SDK 4.0, you may wish to skip to the SDK 4.0 specifics below.

    API Version

    This release of the SDK is written to version 3.3 of the SDK API specification (and matching the features available in Couchbase 7.1 and earlier). For most developers, just using the latest version will be all that matters, and few will need to look at another of our SDKs. Just for those few that do, the table below shows each Couchbase SDK release version that matches the API version.

    Whilst these two numbers match for the C, .NET, Java, and Ruby SDKs, this is not the case for the others, as version numbers for individual SDKs are bumped up in line with Semantic Versioning — check the release notes of each SDK for individual details.

    Table 1. SDK API Versions
    API 2.7 API 3.0 API 3.1 API 3.2 API 3.3

    C (libcouchbase)

    2.10

    3.0

    3.1

    3.2

    3.3

    .NET

    2.7

    3.0

    3.1

    3.2

    3.3

    Go

    1.5 & 1.6

    2.0 & 2.1

    2.2

    2.3 & 2.4

    2.5

    Java

    2.7

    3.0

    3.1

    3.2

    3.3

    Kotlin

    -

    -

    -

    -

    1.0

    Node.js

    2.6

    3.0

    3.1

    3.2 & 4.0

    4.1

    PHP

    2.6

    3.0

    3.1

    3.2

    4.0

    Python

    2.5

    3.0

    3.1

    3.2

    4.0

    Ruby

    -

    3.0

    3.1

    3.2

    3.3

    Scala

    -

    1.0

    1.1

    1.2

    1.3

    SDK API 3.3: Introduced alongside Couchbase Server 7.1, adds Management API for Eventing and Index Management for Scopes & Collections; extends Bucket Management API to support Custom Conflict Resolution and Storage Options; adds new platform support for Linux Alpine OS, Apple M1, and AWS Graviton2; provides improved error messages for better error handling. and an upgraded Spark Connector that runs on Spark 3.0 & 3.1 Platform.

    SDK API 3.2: Introduced alongside Couchbase Server 7.0, provides features in support of Scopes and Collections, extends capabilities around Open Telemetry API to instrument telemetry data, enhanced client side field level encryption to add an additional layer of security to protect sensitive data, adds new platform support such as Ubuntu 20.04 LTS.

    SDK API 3.1: Introduced alongside Couchbase Server 6.6, focuses on Bucket Management API, adds capabilities around Full Text Search features such-as Geo-Polygon support, Flex Index, and Scoring.

    SDK API 3.0: Introduced alongside Couchbase Server 6.5, is a major overhaul from its predecessor, has simplified surface area, removed long-standing bugs and deprecated/removed old API, introduces new programming languages Scala and Ruby, written in anticipation to support Scopes and Collections.

    SDK API 2.7: Introduced alongside Couchbase Server 6.0, with support for its new features such as the Analytics Service, improvements to Full Text Search, and support for more complex network configurations.

    Fundamentals

    Before this guide dives into the language-specific technical component of the migration, it is important to understand the high level changes first. As a migration guide, this document assumes you are familiar with the previous generation of the SDK and does not re-introduce SDK API 2 concepts. We recommend familiarizing yourself with the new SDK first by reading at least the getting started guide, and browsing through the other chapters a little.

    Terminology

    The concept of a Cluster and a Bucket remain the same, but a fundamental new layer is introduced into the API: Collections and their Scopes. Collections are logical data containers inside a Couchbase bucket that let you group similar data just like a Table does in a relational database — although documents inside a collection do not need to have the same structure. Scopes allow the grouping of collections into a namespace, which is very usfeul when you have multilpe tenants acessing the same bucket. Couchbase Server includes support for collections as a developer preview in version 6.5, and as a first class concept of the programming model from version 7.0.

    Note that the SDKs include the feature from SDK 3.0, to allow easier migration.

    In the previous SDK generation, particularly with the KeyValue API, the focus has been on the codified concept of a Document. Documents were read and written and had a certain structure, including the id/key, content, expiry (ttl), and so forth. While the server still operates on the logical concept of documents, we found that this model in practice didn’t work so well for client code in certain edge cases. As a result we have removed the Document class/structure completely from the API. The new API follows a clear scheme: each command takes required arguments explicitly, and an option block for all optional values. The returned value is always of type Result. This avoids method overloading bloat in certain languages, and has the added benefit of making it easy to grasp APIs evenly across services.

    As an example here is a KeyValue document fetch:

    const result = await collection.get(key);
    document = result.value;

    Compare this to a SQL++ (formerly N1QL) query:

    async function queryNamed() {
      const query = `
        SELECT airportname, city FROM \`travel-sample\` 
        WHERE type=$TYPE 
          AND city=$CITY;
      `
      const options = { parameters: { TYPE: 'airport', CITY: 'Reno' } }
    
      try {
        let result = await cluster.query(query, options)
        console.log("Result:", result)
        return result
      } catch (error) {
        console.error('Query failed: ', error)
      }
    }

    Since documents also fundamentally handled the serialization aspects of content, two new concepts are introduced: the Serializer and the Transcoder. Out of the box the SDKs ship with a JSON serializer which handles the encoding and decoding of JSON. You’ll find the serializer exposes the options for methods like N1QL queries and KeyValue subdocument operations,.

    The KV API extends the concept of the serializer to the Transcoder. Since you can also store non-JSON data inside a document, the Transcoder allows the writing of binary data as well. It handles the object/entity encoding and decoding, and if it happens to deal with JSON makes uses of the configured Serializer internally. See the Serialization and Transcoding section below for details.

    What to look out for

    The SDKs are more proactive in retrying with certain errors and in certain situations, within the timeout budget given by the user — as an example, temporary failures or locked documents are now being retried by default — making it even easier to program against certain error cases. This behavior is customizable in a RetryStrategy, which can be overridden on a per operation basis for maximum flexibility if you need it.

    Note, most of the bootstrap sequence is now lazy (happening behind the scenes). For example, opening a bucket is not raising an error anymore, but it will only show up once you perform an actual operation. The reason behind this is to spare the application developer the work of having to do error handling in more places than needed. A bucket can go down 2ms after you opened it, so you have to handle request failures anyway. By delaying the error into the operation result itself, there is only one place to do the error handling. There will still be situations why you want to check if the resource you are accessing is available before continuing the bootstrap; for this, we have the diagnostics and ping commands at each level which allow you to perform those checks eagerly.

    Language Specifics

    Now that you are familiar with the general theme of the migration, the next sections dive deep into the specifics. First, installation and configuration are covered, then we talk about exception handling, and then each service (i.e. Key/Value, Query,…​) is covered separately.

    Installation and Configuration

    The Node.js SDK 3.x and 4.x are available through npm, just like the previous generation. Please see the Release Notes for up-to-date information.

    The Node.js SDK 3.2 has the following dependencies:

      "dependencies": {
        "bindings": "^1.5.0",
        "debug": "^4.3.2",
        "nan": "^2.15.0",
        "parse-duration": "^1.0.0",
        "prebuild-install": "^6.1.4"
      },

    The Node.js SDK 4.0 additionally requires Node 12+ (the oldest supported maintenance LTS release).

    Connection to the Cluster

    const options = { username:"Administrator", password:"password"};
    cluster = await couchbase.connect( "http://127.0.0.1", options);
    bucket = cluster.bucket("travel-sample");
    collection = bucket.scope("inventory").collection("airport");

    Similar to SDK API 2, if you create your own ClusterEnvironment the SDK will not shut it down for you — you need to do this manually at the end of the program lifetime:

    cluster.close();

    Connection String Url Query Parameters

    const options = { username:"Administrator", password:"password"};
    cluster = await couchbase.connect( "http://127.0.0.1/?query_timeout=2000", options);

    Authentication

    Connecting with certificate-based authentication.

    // see sdk-examples/etc for creation of certificates
    const here = process.cwd();
    const truststorepath = here + "/" + '../etc/x509-cert/SSLCA/clientdir/trust.pem';
    const certpath = here + "/" + '../etc/x509-cert/SSLCA/clientdir/client.pem';
    const keypath = here + "/" + '../etc/x509-cert/SSLCA/clientdir'; // gets /client.key from cluster.bucket()
    
    // Setup Cluster Connection Object
    const options = {username: 'testuser', password: 'password'};
    var cluster = new couchbase.Cluster(
        'couchbases://127.0.0.1/travel-sample' +
        '?truststorepath=' + truststorepath +
        '&certpath=' + certpath +
        '&keypath=' + keypath, options);

    Please see the documentation on certificate-based authentication for detailed information on how to configure this properly.

    Connection Lifecycle

    From a high-level perspective, bootstrapping and shutdown is very similar to the SDK API 2.x. One notable difference is that the Collection is introduced and that the individual methods like bucket immediately return, and do not throw an exception. Compare SDK API 2: the openBucket method would not work if it could not open the bucket.

    The reason behind this change is that even if a bucket can be opened, a millisecond later it may not be available any more. All this state has been moved into the actual operation so there is only a single place where the error handling needs to take place. This simplifies error handling and retry logic for an application.

    In SDK API 2, you connected, opened a bucket, performed a KV op, and disconnected like this:

    const cluster = new couchbase.Cluster("127.0.0.1");
    cluster.authenticate("user", "pass");
    const bucket = cluster.openBucket("travel-sample");
    
    const getResult = bucket.get("airline_10");
    
    cluster.close();

    Here is the SDK API 3 equivalent:

    const options = { username:"Administrator", password:"password"};
    cluster = await couchbase.connect( "http://127.0.0.1", options);
    bucket = cluster.bucket("travel-sample");
    collection = bucket.scope("inventory").collection("airport");
    
    const getResult = await collection.get("airport_1254");
    
    cluster.close();

    Collections is generally available from Couchbase Server 7.0 release, but the SDK already encoded it in its API to be future-proof. If you are using a Couchbase Server version which does not support Collections, always use the defaultCollection() method to access the KV API; it will map to the full bucket.

    You’ll notice that bucket(String) returns immediately, even if the bucket resources are not completely opened. This means that the subsequent get operation may be dispatched even before the socket is open in the background. The SDK will handle this case transparently, and reschedule the operation until the bucket is opened properly. This also means that if a bucket could not be opened (say, because no server was reachable) the operation will time out. Please check the logs to see the cause of the timeout (in this case, you’ll see socket connect rejections).

    Also note, you will now find Query, Search, and Analytics at the Cluster level. This is where they logically belong. If you are using Couchbase Server 6.5 or later, you will be able to perform cluster-level queries even if no bucket is open. If you are using an earlier version of the cluster you must open at least one bucket, otherwise cluster-level queries will fail.

    Serialization and Transcoding

    In SDK API 2 the main method to control transcoding was through providing different Document instances (which in turn had their own transcoder associated), such as the JsonDocument. This only worked for the KV APIs though — Query, Search, Views, and other services exposed their JSON rows/hits in different ways. All of this has been unified in SDK API 3 under a single concept: serializers and transcoders.

    By default, all KV APIs transcode to and from JSON — you can also provide Javascript objects which you couldn’t in the past.

    const  upsertResult = await collection.upsert("mydoc-id", { myvalue: "me"});
    const getResult = await collection.get("mydoc-id");
    console.log(getResult);

    If you want to write binary data, you can use a new RawBinaryTranscoder():

    const content = Buffer.from("some data to become binary");
    const  upsertResult = await collection.upsert(
      "mydoc-id",
      content,
      {transcoder:new RawBinaryTranscoder()}
    );
    const getResult = await collection.get("mydoc-id");
    console.log(getResult);

    Exception Handling

    How to handle exceptions is unchanged from SDK API 2. You should still use try/catch on the blocking APIs and the corresponding reactive/async methods on the other APIs. There have been changes made in the following areas:

    • Exception hierarchy and naming.

    • Proactive retry where possible.

    Exception hierarchy

    The exception hierarchy is now flat and unified under a CouchbaseError. Each CouchbaseError has an associated ErrorContext which is populated with as much info as possible and then dumped alongside the stack trace if an error happens.

    Here is an example of the error context if a SQL++ query is performed with an invalid syntax (i.e. select 1= from):

    Exception in thread "main" com.couchbase.client.core.error.ParsingFailedException: Parsing of the input failed {"completed":true,"coreId":1,"errors":[{"code":3000,"message":"syntax error - at from"}],"idempotent":false,"lastDispatchedFrom":"127.0.0.1:62253","lastDispatchedTo":"127.0.0.1:8093","requestId":3,"requestType":"QueryRequest","retried":11,"retryReasons":["ENDPOINT_TEMPORARILY_NOT_AVAILABLE","BUCKET_OPEN_IN_PROGRESS"],"service":{"operationId":"9111b961-e585-42f2-9cab-e1501da7a40b","statement":"select 1= from","type":"query"},"timeoutMs":75000,"timings":{"dispatchMicros":15599,"totalMicros":1641134}}

    Proactive Retry

    One reason why the APIs do not expose a long list of exceptions is that the SDK now retries as many operations as it can if it can do so safely. This depends on the type of operation (idempotent or not), in which state of processing it is (already dispatched or not), and what the actual response code is if it arrived already. As a result, many transient cases — such as locked documents, or temporary failure — are now retried by default and should less often impact applications. It also means, when migrating to SDK API 3, you may observe a longer period of time until an error is returned by default.

    Operations are retried by default as described above with the default BestEffortRetryStrategy.

    Migrating Services

    The following section discusses each service in detail and covers specific bits that have not been covered by the more generic sections above.

    Key Value

    The Key/Value (KV) API is now located under the Collection interface, so even if you do not use collections, the defaultCollection() needs to be opened in order to access it.

    The following table describes the SDK API 2 KV calls and where they are now located in SDK API 3:

    Table 2. KV API Changes
    SDK API 2 SDK API 3

    bucket.upsert

    collection.upsert

    bucket.get

    collection.get

    bucket.exists

    collection.exists

    bucket.getFromReplica

    collection.getAnyReplica and collection.getAllReplicas

    bucket.getAndLock

    collection.getAndLock

    bucket.getAndTouch

    collection.getAndTouch

    bucket.insert

    collection.insert

    bucket.upsert

    collection.upsert

    bucket.replace

    collection.replace

    bucket.remove

    collection.remove

    bucket.unlock

    collection.unlock

    bucket.touch

    collection.touch

    bucket.lookupIn

    collection.lookupIn

    bucket.mutateIn

    collection.mutateIn

    bucket.counter

    binarycollection.increment and binarycollection.decrement

    bucket.append

    binarycollection.append

    bucket.prepend

    binarycollection.prepend

    In addition, the datastructure APIs have been renamed and moved:

    Table 3. Datastructure API Changes
    SDK API 2 SDK API 3

    bucket.mapAdd

    collection.map

    bucket.mapGet

    collection.map

    bucket.mapRemove

    collection.map

    bucket.mapSize

    collection.map

    bucket.listGet

    collection.list

    bucket.listAppend

    collection.list

    bucket.listRemove

    collection.list

    bucket.listPrepend

    collection.list

    bucket.listSet

    collection.list

    bucket.listSize

    collection.list

    bucket.setAdd

    collection.set

    bucket.setContains

    collection.set

    bucket.setRemove

    collection.set

    bucket.setSize

    collection.set

    bucket.queuePush

    collection.queue

    bucket.queuePop

    collection.queue

    There are two important API changes:

    • On the request side, overloads have been reduced and moved under a Options block

    • On the response side, the return types have been unified.

    The signatures now look very similar. The concept of the Document as a type is gone in SDK API 3 and instead you need to pass in the properties explicitly. This makes it very clear what is returned, especially on the response side.

    Thus, the get method does not return a Document but a GetResult instead, and the upsert does not return a Document but a MutationResult. Each of those results only contains the field that the specific method can actually return, making it impossible to accidentally try to access the expiry on the Document after a mutation, for example.

    Instead of having many overloads, all optional params are now part of the Option block. All required params are still part of the method signature, making it clear what is required and what is not (or has default values applied if not overridden).

    The timeout can be overridden on every operation and now takes a Duration from java 8. Compare SDK API 2 and SDK API 3 custom timeout setting:

    // SDK API 2 custom timeout
    bucket.get("mydoc-id", 5000);
    // SDK API 3 custom timeout
    const getResult = await collection.get( "airport_1254", {timeout : 2000});

    In SDK API 2, the getFromReplica method had a ReplicaMode argument which allowed to customize its behavior on how many replicas should be reached. We have identified this as a potential source of confusion and as a result split it up in two methods that simplify usage significantly. There is now a getAllReplicas method and a getAnyReplica method.

    • getAllReplicas asks the active node and all available replicas and returns the results as a stream.

    • getAnyReplica uses getAllReplicas, and returns the first result obtained.

    Unless you want to build some kind of consensus between the different replica responses, we recommend getAnyReplica for a fallback to a regular get when the active node times out.

    Operations which cannot be performed on JSON documents have been moved to the binarycollection, accessible through Collection.binary(). These operations include append, prepend, increment, and decrement (previously called counter in SDK API 2). These operations should only be used against non-json data. Similar functionality is available through mutateIn on JSON documents.

    Query

    SQL++ querying is now available at the Cluster level instead of the bucket level, because you can also write SQL++ queries that span multiple buckets. Compare a simple SQL++ query from SDK API 2 with its SDK API 3 equivalent:

    // SDK API 2 simple query
    queryResult = await bucket.query(
          couchbase.N1qlQuery.fromString('SELECT * FROM `travel-sample` WHERE city=$1 LIMIT 10'),
          [ 'Paris' ]);
    
    queryResult.rows.forEach((row)=>{
          console.log(row);
       });
    // SDK API 3 simple query
    const queryResult = await cluster.query("SELECT * FROM `travel-sample` WHERE city=$1 LIMIT 10", { parameters: ['Paris']});
    queryResult.rows.forEach((row)=>{
       console.log(row);
    });

    Note that there is no N1qlQuery.fromString any more — and query parameters argument has been moved to the options parameter for consistency reasons. The following shows how to do named and positional parameters in SDK API 3:

    // SDK API 3 named parameters
    const queryResultNamed = await cluster.query("SELECT * FROM `travel-sample` WHERE city=$CITY LIMIT 10", { parameters: {CITY:'Paris'}});
    queryResultNamed.rows.forEach((row)=>{
       console.log(row);
    });
    // SDK API 3 positional parameters
    const queryResultPositional = await cluster.query("SELECT * FROM `travel-sample` WHERE city=$1 LIMIT 10", { parameters: ['Paris']});
    queryResultPositional.rows.forEach((row)=>{
       console.log(row);
    });

    Much of the non-row metadata has been moved into a specific QueryMetaData section:

    It is no longer necessary to check for a specific error in the stream: if an error happened during processing it will throw an exception at the top level of the query. The reactive streaming API will terminate the rows' Flux with an exception as well as soon as it is discovered. This makes error handling much easier in both the blocking and non-blocking cases.

    While in SDK API 2 you had to manually check for errors (otherwise you’d get an empty row collection):

    const queryResult = bucket.query(N1qlQuery.simple("select 1="));
    if (!queryResult.errors.isEmpty()) {
      // errors contain [{"msg":"syntax error - at end of input","code":3000}]
    }

    In SDK API 3 the top level query method will throw an exception:

    Parsing of the input failed {"completed":true,"coreId":1,"errors":[{"code":3000,"message":"syntax error - at end of input"}],"idempotent":false,"lastDispatchedFrom":"127.0.0.1:51703","lastDispatchedTo":"127.0.0.1:8093","requestId":5,"requestType":"QueryRequest","retried":0,"service":{"operationId":"1c623a77-196a-4890-96cd-9d4f3f596477","statement":"select 1=","type":"query"},"timeoutMs":75000,"timings":{"dispatchMicros":13798,"totalMicros":70789}}
    	at com.couchbase.client.java.AsyncUtils.block(AsyncUtils.java:51)
    	at com.couchbase.client.java.Cluster.query(Cluster.java:225)

    Not only does it throw a CouchbaseError, it also tries to map it to a specific exception type and include extensive contextual information for a better troubleshooting experience.

    Analytics

    Analytics querying, like SQL++, is also moved to the Cluster level: it is now accessible through the Cluster.analyticsQuery method. As with the Query service, parameters for the Analytics queries have moved into the AnalyticsOptions:

    // SDK API 3 simple analytics query
    const analyticsResult = await cluster.analyticsQuery("select * from `travel-dataset` LIMIT 10");
    analyticsResult.rows.forEach((row)=>{
       console.log(row);
    });
    // SDK API 3 named parameters for analytics
    const analyticsResult1 = await cluster.analyticsQuery(
      "select * from `travel-sample` where city = $CITY LIMIT 10",
      { parameters : { CITY : "Paris"}}
    ).catch((e)=>{console.log(e); throw e;});
    analyticsResult1.rows.forEach((row)=>{
       console.log(row);
    });
    
    // SDK API 3 positional parameters for analytics
    const analyticsResult2 = await cluster.analyticsQuery(
      "select * from `travel-sample` where city = $1 LIMIT 10",
      { parameters : [ "airport" ] }
    );
    analyticsResult2.rows.forEach((row)=>{
       console.log(row);
    });

    Also, errors will now be thrown as top level exceptions and it is no longer necessary to explicitly check for errors:

    // SDK API 2 error check
    AnalyticsQueryResult analyticsQueryResult = b1.query(AnalyticsQuery.simple("select * from foo"));
    if (!analyticsQueryResult.errors().isEmpty()) {
      // errors contain [{"msg":"Cannot find dataset foo in dataverse Default nor an alias with name foo! (in line 1, at column 15)","code":24045}]
    }

    The Search API has changed a bit in SDK API 3 so that it aligns with the other query APIs. The type of queries have stayed the same, but all optional parameters moved into SearchOptions. Also, similar to the other query APIs, it is now available at the Cluster level.

    Here is a SDK API 2 Search query with some options, and its SDK API 3 equivalent:

    //  SDK API 2 search query
    const searchResult = bucket.query(
      "airports"",
      { indexName : "airport_view", limit:5, fields : [ "a", "b", "c"]}
      2000,
    );
    searchResult.rows.forEach((row)=>{
          console.log(row);
      });
    }
        // SDK API 3 search query
        const ftsQuery =  couchbase.SearchQuery.match("airport");
        const searchResult = await cluster.searchQuery(
          "hotels",
          ftsQuery,
          { timeout:2000,
            limit:5,
            fields : ["a", "b", "c"] },
          (err, res) => {
    if(err) console.log(err);
    if(res) console.log(res);
          }
        );
        searchResult.rows.forEach((row)=>{
           console.log(row);
        });

    If you want to be absolutely sure that you didn’t get only partial data, you can check the error map:

    const ftsQuery =  couchbase.SearchQuery.match("airport");
    const searchResult = await cluster.searchQuery(
      "hotels",
      ftsQuery,
      { timeout:2000,
        limit:5}
    ).catch((e)=>{console.log(e); throw e;});
    console.log(searchResult);
    if (searchResult.meta.status.failed == 0) {
      searchResult.rows.forEach((row)=>{
         console.log(row);
      });
    }

    Views

    Views have stayed at the Bucket level, because it does not have the concept of collections and is scoped at the bucket level on the server as well. The API has stayed mostly the same, the most important change is that staleness is unified under the ViewConsistency enum.

    Table 4. View Staleness Mapping
    SDK API 2 SDK API 3

    Stale.TRUE

    QueryScanConsistency.NotBounded

    Stale.FALSE

    QuerywScanConsistency.RequestPlus

    Stale.UPDATE_AFTER

    removed

    Compare this SDK API 2 view query with its SDK API 3 equivalent:

    // SDK API 2 view query
    const query = async bucket.query(
      "design", "view", {limit:5, skip:2},
      10000
    );
    query.rows.forEach((row)=>{
          console.log(row);
      });
    }
    // SDK API 3 view query
    const viewResult = await bucket.viewQuery(
      "dev_airports",
      "airport_view",
      { limit:5, skip:2, timeout:10000 }
    ).catch((e)=>{console.log(e); throw e;});
    viewResult.rows.forEach((row)=>{
       console.log(row);
    });

    Management APIs

    In SDK API 2, the management APIs were centralized in the clustermanager at the cluster level and the bucketmanager at the bucket level. Since SDK API 3 provides more management APIs, they have been split up in their respective domains. So for example when in SDK API 2 you needed to remove a bucket you would call clustermanager.removeBucket you will now find it under bucketmanager.dropBucket. Also, creating a SQL++ index now lives in the queryindexmanager, which is accessible through the cluster.

    The following table provides a mapping from the SDK API 2 management APIs to those of SDK API 3:

    Table 5. clustermanager changes
    SDK API 2 SDK API 3

    clustermanager.info

    removed

    clustermanager.getBuckets

    bucketmanager.getAllBuckets

    clustermanager.getBucket

    bucketmanager.getBucket

    clustermanager.hasBucket

    removed

    clustermanager.insertBucket

    bucketmanager.createBucket

    clustermanager.updateBucket

    bucketmanager.updateBucket

    clustermanager.removeBucket

    bucketmanager.dropBucket

    clustermanager.upsertUser

    usermanager.upsertUser

    clustermanager.removeUser

    usermanager.dropUser

    clustermanager.getUsers

    usermanager.getAllUsers

    clustermanager.getUser

    usermanager.getUser

    clustermanager.apiClient

    removed

    Table 6. bucketmanager changes
    SDK API 2 SDK API 3

    bucketmanager.info

    removed

    bucketmanager.flush

    bucketmanager.flushBucket

    bucketmanager.getDesignDocuments

    viewindexmanager.getAllDesignDocuments

    bucketmanager.getDesignDocument

    viewindexmanager.getDesignDocument

    bucketmanager.insertDesignDocument

    viewindexmanager.upsertDesignDocument

    bucketmanager.upsertDesignDocument

    viewindexmanager.upsertDesignDocument

    bucketmanager.removeDesignDocument

    viewindexmanager.dropDesignDocument

    bucketmanager.publishDesignDocument

    viewindexmanager.publishDesignDocument

    bucketmanager.listN1qlIndexes

    queryindexmanager.getAllIndexes

    bucketmanager.createN1qlIndex

    queryindexmanager.createIndex

    bucketmanager.createN1qlPrimaryIndex

    queryindexmanager.createPrimaryIndex

    bucketmanager.dropN1qlIndex

    queryindexmanager.dropIndex

    bucketmanager.dropN1qlPrimaryIndex

    queryindexmanager.dropPrimaryIndex

    bucketmanager.buildN1qlDeferredIndexes

    queryindexmanager.buildDeferredIndexes

    bucketmanager.watchN1qlIndexes

    queryindexmanager.watchIndexes

    Encryption

    Due to a change in algorithms and API, SDK API 2 cannot read fields encrypted by SDK API 3. Learn more in the encryption guide.

    SDK 4.x specifics

    Node.js SDK 4.0 implements the SDK API 3 spec, so all the steps above also apply to a migration from a Node.js SDK 2.x directly to Node.js SDK 4.0.

    Additionally, the Node.js SDK 4.0 offers a new backend (Couchbase++) with support for multi-document ACID transactions, as well as the capabilities required for upcoming features. You should be aware of the following considerations arising from this new backend implementation.

    The following features are unsupported in 4.0. They are available in 3.2, and will be available in a later 4.x release.

    In addition:

    • The required minimum version of Node.js is now v12 (the oldest supported maintenance LTS release).

    • Ping error entries are now typed.

    • get requests on locked documents now retry rather than fast-fail.

    • The changes to Client Settings are documented in the API reference.

    • The changes to Connection Strings are documented in the API reference.

    Comparing Older Documentation

    You may want to visit documentation for older versions of the SDK, to help to understand application code that you are migrating. Versions that have reached end of life can be found in the archive. In the release notes pages of these older docs, you will also find links to the API reference for each no-longer-supported release.