Best Practices for Deploying Couchbase on Microsoft Azure
The Azure Resource Manager (ARM) templates aim to configure Couchbase according to our recommended best practices on Azure. Couchbase recommends ARM for all deployments on Azure. We do not recommend Azure Service Manager (ASM), also known as Classic.
A variety of compute types support premium storage. Any such node will work well with Couchbase, though some may be more cost effective. DS v3, ES v3, FS and GS machines are the most commonly used. While one core machines will deploy successfully, we recommend machines with 4 or more cores for production applications.
For a majority of applications the ES16 v3 will be a good balance of price and performance.
We recommend using VM Scale Sets (VMSS) instead of stand alone VMs as it improves reliability and simplifies the addition and removal of nodes.
Couchbase recommends allocating 85% of system memory to the database. When using MDS this can be tuned between data, query, etc. The templates currently allocate 50% for data and 15% for index. This can be adjusted after deployment.
Fault Tolerance and High Availability
Couchbase is a strongly consistent database with peer-to-peer replication for handling node failures. Replicas are not needed to increase read performance due to a built-in managed caching layer. For deployments in Azure, we typically recommend one replica. In the event of a single node failure, replicas elsewhere in the cluster can be automatically promoted if automatic failover is enabled. For most scenarios, the downed node will recover in a matter of minutes, obviating the need for additional replicas.
A minimum of 3 nodes required for the data service to support automatic failover, and a minimum of two nodes for the query, index and FTS service to support high availability. Depending on your performance and topology needs, these services can be collocated or separated but the minimum node count requirement does not change.
Azure currently has availability zones in preview. However, the GA model for resileince is based on Availability Sets that are made up of Fault Domains (FD) and Upgrade Domains (UD). VMSS default to configuring 5 FDs, each with their own UD. We recommend configuring a Server Group for each FD. The templates don’t yet automate this step.
We recommend using Azure Premium Storage for data drives. Ephemeral drives present a risk of data loss. Standard Storage is based on spinning magnetic disks (HDD) and does not perform well enough for most database applications. HDD is sufficient for OS disks.
Premium Storage comes in a variety of sizes. We recommend a 1TB P30 drive as the upper end. Large drives can lead to overly dense nodes that suffer from long rebuild times. It’s usually preferable to scale horizontally instead.
We strongly recommend using managed disks for both the OS and data disks. The older Storage Account mechanism has a higher potential for bottlenecks and is more complex.
Microsoft recommends disabling Premium Storage caching for mixed read/write workloads like Couchbase.
There are three potential network setups in Azure. Those are detailed below.
The Couchbase recommended setup is to attach a public IP to each node. The public IP can be used to connect application drivers and replicate across geographies with XDCR.
The templates configure each Couchbase node with the public DNS.
Because the public DNS resolves to a NAT based IP, we recommend adding a record to
/etc/hosts on each node to resolve its public DNS to
That allows Couchbase to bind to the IP underlying the public DNS.
Traffic between public IPs in Azure is routed over the Azure backbone, not the public internet. The backbone has a bandwidth in 100s-1000s G. This means that traffic is limited by the network cap of a VM. Larger VMs have a 10G network cap.
An alternative is to use VPN Gateways. The highest performance VPN Gateway has a 1.25G cap. Note that this cap is for the entire deployment, not a single node. As a result, traffic for most clusters will bottleneck on the gateway. Latency is also an issue with this setup.
VPN Gateway setup is complex. A gateway must be configured in each region and then unidirectional connections created between them. When connecting multiple regions, the number of connections required will grow exponentially.
We do not recommend VPN Gateways given their complexity of configuration and poor performance. It is our understanding that Microsoft intends VPN gateways for client to server connections, not high performance clustered applications like Couchbase.
An Express Route circuit is a leased line. Microsoft works with providers like Verizon and Equinix to provide these lines. The highest bandwidth line is 10G and costs $50,000 per month. Note this is the bandwidth for the entire deployment, not a single node.
Express Route also has a setup time measured in weeks to months as it includes both manual setup tasks and contract negotiations.
Express Route traffic is routed through wherever the circuit exists. So, if you are running a deployment with nodes in New York and San Francisco and your Express Route circuit is in London, all traffic will be routed across the Atlantic and back.
While Express Route is useful for on-prem/Azure hybrid solutions we do not recommend it for Azure to Azure XDCR communication.
The template automatically sets up a username and password for the Couchbase Web Administrator. The template also configures a Network Security Group (NSG) that closes off unused ports. This configuration can be further secured by specifying CIDR blocks to whitelist and blocking others.
Azure automatically configures disk encryption for Managed Disks that use Premium Storage. More detail is available here.
The template does not currently configure SSL. We recommend setting it up for production applications.
These templates open Sync Gateway access to the internet over ports 4984 and 4985.
We typically recommend securing the admin interface for access from
That can be done by editing the /home/sync_gateway/sync_gateway.json file.