A newer version of this documentation is available.

View Latest

Install Sync Gateway

      +

      Install a Sync Gateway instance; securely sync enterprise data from cloud to edge.
      This is Step 3 in the Start Here! topic group. It installs the Sync Gateway binary distribution

      Related Start Here! topics: Introduction | Prepare | Verify

      Preparatory Steps
      Ensure you have read — and acted-upon — the information in Prepare.
      Steps in Getting Started

      Introduction | Prepare | Install | Verify

      Installation Process

      You can install Sync Gateway on any of the supported operating systems. On completion of this topic you should have a working Sync Gateway that you can extend and configure to meet your business needs.

      The installation process first deploys the Sync Gateway package, then defines and starts an example instance of Sync Gateway running as a service.

      By default Sync Gateway bases its initial setup on an example configuration file serviceconfig.json, provided in the examples directory.

      This initial configuration has limited functionality. It is intended primarily to verify the success of the installation by proving a connection to Sync Gateway can be made.

      Configuration

      Sync Gateway’s initial setup uses configuration details from a file its install script creates (sync_gateway.json, or serviceconfig.json on Windows).

      To provide your own configuration to Sync Gateway, you can either:

      • Continue using the default file.
        You will need to restart Sync Gateway after each change.

      • Run Sync Gateway from a command-line and provide a path to the required configuration file as a parameter.

      • Run Sync Gateway as a service and set it to use the required configuration file path.
        Instructions on how to do this are given in the Install section for each of the platforms as they differ lightly.

      You can refer to the Configuration Overview for more on the configuration process and to the Bootstrap Configuration for details on the configuration options for Centralized Persistent Modular configuration.

      To run in legacy mode see Legacy Pre-3.0 Configuration.

      We also discuss more on the initial configuration in the next Getting Started section — see: Verify. Also, the installation package itself contains example configuration files — see the appropriate install platform section for details on their location.

      Install for Linux

      In this Section

      Install | Install Locations | Run | Configuration

      Download

      Download the required edition of Sync Gateway from the downloads page.

      Install

      Follow the appropriate install option from the methods shown.

      Install Options
      • Ubuntu

      • Red Hat/CentOS

      • Debian

      Install sync_gateway with the dpkg package manager:

      dpkg -i couchbase-sync-gateway-enterprise_3.0.9_x86_64.deb

      Install sync_gateway with the rpm package manager:

      rpm -i couchbase-sync-gateway-enterprise_3.0.9_x86_64.rpm

      Install sync_gateway with the dpkg package manager:

      dpkg -i couchbase-sync-gateway-enterprise_3.0.9_x86_64.deb

      When the installation is complete Sync Gateway will be running as a service named sync_gateway.

      To stop and start the sync_gateway service, use the methods show in Run.

      Install Locations

      The default Sync Gateway installation uses the locations shown in Table 1.

      Table 1. Default Installation Locations

      Content

      Location

      Example

      Binaries

      The installation directory

      /opt/couchbase-sync-gateway/bin/

      Configuration files

      The sync_gateway user’s home directory

      /home/sync_gateway/sync_gateway.json

      Example Configs

      The installation directory

      /opt/couchbase-sync-gateway/examples/

      Log files

      The sync_gateway user’s home directory

      /home/sync_gateway/logs/

      Scripts

      The installation directory

      /opt/couchbase-sync-gateway/service/

      Service

      systemd library

      /lib/systemd/system/sync_gateway.service or /usr/lib/systemd/system/sync_gateway.service

      Run

      You can run Sync Gateway as a service, or directly from a command line, using one of the methods show here.

      Command Line

      Start
      (1)
      /opt/couchbase-sync-gateway/bin/sync_gateway <path-to-configuration-file> (2)
      1 Where /opt/couchbase-sync-gateway/ is the location into which you deployed the Sync Gateway package.
      2 Where <path-to-configuration-file> resolves to a JSON format file containing the Sync Gateway configuration, for example, /home/sync_gateway/sync-gateway-config.json
      Stop

      You can stop Sync Gateway instances started in this way by using Ctrl+C. There is no specific shutdown procedure and it is safe to stop it at any time. For other command-line options — see Command Line Options

      Services

      Using systemd
      systemctl start sync_gateway
      systemctl stop sync_gateway
      Using init
      service sync_gateway start
      service sync_gateway stop

      Configuration

      To change the default configuration file path of an existing Sync Gateway service you need to edit the service descriptor.

      For systemd this will be sync_gateway.service in either /lib/systemd/system/sync_gateway.service or /usr/lib/systemd/system/sync_gateway.service

      You will need to find and replace the path in following line with your required path: Environment="CONFIG=/home/sync_gateway/sync_gateway.json"

      One way to do this is to use systemctl
      1. Ensure the new file path includes a useable Sync Gateway configuration file.

      2. Stop the service.

      3. Copy the existing sync_gateway.service file to a safe location as a back-up.

      4. Use sudo systemctl --full edit sync_gateway to edit the service.
        This will create a temporary file in /etc/systemd/system/sync_gateway.d containing your changes. This file is picked-up and applied when the daemon reloads. Note, systemctl edit automatically reloads the edited unit.

      5. Replace the path in Environment="CONFIG=/home/sync_gateway/sync_gateway.json" with your required path.

      6. Save the changes.
        When the daemon reload completes, Sync Gateway will restart using the required configuration file.

      Install for Windows

      In this Section

      Install | Install Locations | Run | Configuration

      Download

      Download the required edition of Sync Gateway from the downloads page.

      Install

      Open the installer and follow the instructions. If the installation was successful you will see the following:

      windows installation complete

      When the installation is complete Sync Gateway will be running as a service SyncGateway.

      To stop/start the SyncGateway service, use the methods show in Run.

      Install Locations

      The default Sync Gateway installation uses the locations shown in Table 2.

      Table 2. Default Installation Locations

      Content

      Location

      Binaries

      C:\Program Files\Couchbase\Sync Gateway\

      Configuration files

      C:\Program Files\Couchbase\Sync Gateway\

      Examples

      C:\Program Files\Couchbase\Sync Gateway\examples

      Log files

      C:\Program Files\Couchbase\Sync Gateway\var\lib\couchbase\logs

      Tools

      C:\Program Files\Couchbase\Sync Gateway\tools

      Run

      You can run Sync Gateway as a service, or directly from a command line, using one of the methods show here.

      Command Line

      Start
      c:\PROGRA~1\COUCHB~1\SYNCGA~1\SYNC_G~1.EXE <path-to-configuration-file> (1)
      1 Where:
      • The path to the executable uses Windows' short name notation

      • <path-to-configuration-file> resolves to a JSON format file containing the Sync Gateway configuration, for example, {home-location-windows}sync-gateway-config.json

      Stop

      You can stop Sync Gateway instances started in this way by using Ctrl+C. There is no specific shutdown procedure and it is safe to stop it at any time. For other command-line options — see Command Line Options

      Service

      Using the Windows' Services Application
      1. From the Start Menu, Control Panel → Admin Tools → Services

      2. Within the Service panel, locate and Right-Click the service

      3. From the Options Menu, select Start (or Stop) Enter

      Using Windows' Command Line Utility sc.exe
      1. Start Sync Gateway Service

        c:\> sc start SyncGateway

        This will result in a response such as:

        SERVICE_NAME: SyncGateway
                TYPE               : 10  WIN32_OWN_PROCESS
                STATE              : 2  START_PENDING
                                        (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
                WIN32_EXIT_CODE    : 0  (0x0)
                SERVICE_EXIT_CODE  : 0  (0x0)
                CHECKPOINT         : 0x0
                WAIT_HINT          : 0x7d0
                PID                : 7420
                FLAGS              :
      2. Stop Sync Gateway Service

        c:\> sc stop SyncGateway

        This will result in a response such as:

        SERVICE_NAME: SyncGateway
                TYPE               : 10  WIN32_OWN_PROCESS
                STATE              : 4  RUNNING
                                        (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
                WIN32_EXIT_CODE    : 0  (0x0)
                SERVICE_EXIT_CODE  : 0  (0x0)
                CHECKPOINT         : 0x0
                WAIT_HINT          : 0x0

      Configuration

      To change the default configuration file path of an existing Sync Gateway service you need to edit the service descriptor.

      For Windows, the configuration path is provided as a command line parameter embedded within the SyncGateway service’s binpath.

      One way to edit the binpath value is to use Windows' Service Control Manager’s command line utility sc.exe config. See the Syntax of the sc.exe Command and an example of the command in use in Example 1.

      Syntax of the sc.exe Command

      The format of the sc.exe command is shown below. For presentation purposes it is split over several lines. It should be input as a single line.

      sc <remote-server-name> (1)
        config (2)
        SyncGateway (3)
        binpath= (4)
        " (5)
        [path-to-sg-windows.exe] start [path-to-sync_gateway.exe] (6)
        [path-to-config-file] (7)
        [path-to-error-logs] (8)
        " (9)
      1 Omit the <remote-server-name> parameter if the service is local
      2 Specifies the function we are using, config, in this instance
      3 Identifies the service being changed
      4 Specifies the string value of the path to the binary to be run, and any command line parameters. The rules for formatting the binpath value are quite complex:
      • The entire string value must be enclosed in quotes

      • There must be one space (only) following the equals sign and none before it

      • Each of the [path-to …​] elements must themselves be enclosed in quotes. These inner quotes must be escaped (for example \" …​ \")

      5 Opening quotes for the binpath, preceded by a single space.
      6 Path to the binaries.
      7 You can provide the required configuration file path name here in the form:
      \"path/to/file/name.json\"
      8 You can provide the required log file path name here in the form:
      \"path/to/file/name.log\"
      9 Closing quotes for the binpath, preceded by a single space.
      Example 1. Sample sc.exe Use

      This example changes the configuration file name from serviceconfig.json to sync-gateway-config.json

      sc config SyncGateway binpath= "\"C:\Program Files\Couchbase\Sync Gateway\sg-windows.exe\" start \"C:\Program Files\Couchbase\Sync Gateway\sync_gateway.exe\" \"C:\Program Files\Couchbase\Sync Gateway\sync-gateway-config.json\" \"C:\Program Files\Couchbase\Sync Gateway\var\lib\couchbase\logs\sync_gateway_error.log\""

      Install for Mac OS

      In this Section

      Install | Install Locations | Run | Configuration

      Download

      Download the required edition of Sync Gateway from the downloads page.

      Install

      1. Unpack the .zip file to the /opt directory.

        sudo unzip -d /opt couchbase-sync-gateway-enterprise_3.0.9_x86_64.zip
      2. Create a new macOS user.

        sudo sysadminctl -addUser sync_gateway

        If the operation is successful, you will get the following output.

        sysadminctl ----------------------------
        sysadminctl No clear text password or interactive option was specified (adduser, change/reset password will not allow user to use FDE) !
        sysadminctl ----------------------------
        sysadminctl Creating user record…
        sysadminctl Assigning UID: 505
        sysadminctl Creating home directory at /Users/sync_gateway
      3. Create a new group and add the sync_gateway user to that group.

        sudo dseditgroup -o create sync_gateway
        sudo dseditgroup -o edit -a sync_gateway -t user sync_gateway
      4. Define the Sync Gateway Service

        This script will define and load the service, which is set it to automatically restart.

        Other scripts in the service directory are available to update or uninstall the service.

        cd /opt/couchbase-sync-gateway//service
        sudo ./sync_gateway_service_install.sh <optional-args> (1)
        1 Note that you can, by using optional parameters, provide alternative file paths for the Sync Gateway configuration file (--cfgpath=) or log files () path (--logsdir=). These will be used instead of the default path whenever the service starts.

        So, for example:
        sudo ./sync_gateway_service_install.sh --cfgpath=sync-gateway-config.json

      5. When the install is complete the sync_gateway service will be running

        To stop/start the sync_gateway service, use the methods show in Run

      Install Locations

      The default Sync Gateway installation uses the locations shown in Table 3.

      Table 3. Default Installation Locations

      Content

      Location

      Example

      Binaries

      The installation directory

      /opt/couchbase-sync-gateway/bin/

      Configuration files

      The sync_gateway user’s home directory

      /users/sync_gateway/

      Examples

      The installation directory

      /opt/couchbase-sync-gateway/examples/

      Log files

      The sync_gateway user’s home directory

      /users/sync_gateway/logs/

      Scripts

      The installation directory

      /opt/couchbase-sync-gateway/service/

      Service

      Library directory

      /Library/LaunchDaemons/com.couchbase.mobile.sync_gateway.plist

      Run

      You can run Sync Gateway as a service, or directly from a command line, using one of the methods show here.

      Command Line

      Start
      (1)
      /opt/couchbase-sync-gateway/bin/sync_gateway <path-to-configuration-file> (2)
      1 Where /opt/couchbase-sync-gateway/ is the location into which you deployed the Sync Gateway package.
      2 Where <path-to-configuration-file> resolves to a JSON format file containing the Sync Gateway configuration, for example, /users/sync_gateway/sync-gateway-config.json
      Stop

      You can stop Sync Gateway instances started in this way by using Ctrl+C. There is no specific shutdown procedure and it is safe to stop it at any time. For other command-line options — see Command Line Options

      Service

      sudo launchctl load -w /Library/LaunchDaemons/com.couchbase.mobile.sync_gateway.plist (1)
      
      sudo launchctl unload -w /Library/LaunchDaemons/com.couchbase.mobile.sync_gateway.plist (2)
      1 Here we load, and automatically start, the default sync_gateway service
      2 Here we unload the default sync_gateway service. Note that it is not sufficient to stop the service. It is configured to automatically restart.

      Configuration

      To change the default configuration file path of an existing Sync Gateway service you need to edit the service descriptor.

      For Mac OS this will be the .plist file com.couchbase.mobile.sync_gateway.plist.

      One way to do this would be:
      1. Ensure the new file path includes a useable Sync Gateway configuration file

      2. Within a terminal, stop the service — see: start and stop the service

      3. Copy the existing com.couchbase.mobile.sync_gateway.plist file to a safe location as a back-up

      4. Open the com.couchbase.mobile.sync_gateway.plist file in an editor. You will need to use sudo

      5. Within the ProgramArguments section of the .plist, find and edit the configuration file path, which by default contains: <string>/Users/sync_gateway/sync_gateway.json</string>

      6. Save your changes

      7. Restart the service  — see: start and stop the service

      Check the Install

      To check Sync Gateway started successfully, you can now connect to it from a browser by using either:

      You should receive a response in the browser such as:
      {"couchdb":"Welcome","vendor":{"name":"Couchbase Sync Gateway","version":"3.0"},"version":"Couchbase Sync Gateway/{version-maintenance}(145;e3f46be) EE"}

      If you do encounter issues in getting an operational install of Sync Gateway, you can find some useful information in the log files. Refer to the Logging page for how to configure different logging levels to aid troubleshooting.

      Next Steps

      Now that you have a working version of Sync Gateway, which you can connect a console to using either the Public or Admin REST API, you can: