A newer version of this documentation is available.

View Latest
February 16, 2025
+ 12
Email alerts can be dispatched automatically.

Configuring Alerts

Alerts can be dispatched automatically by Couchbase Server, in order to highlight specific issues and problems. When an issue arises, one or both of the following can occur, based on user-configuration:

  • The alert is sent as an email by Couchbase Server to a configured SMTP server. From there, the email is forwarded to a configured list of email recipients. All cluster-nodes must have network access to the configured SMTP server, for the system to be fully effective.

  • The alert appears as a pop-up, within the Couchbase Web Console of its recipient.

Only Full Administrators and Cluster Administrators can configure email alerts. Configuration can be performed with Couchbase Web Console, the Couchbase CLI, or the REST API.

Configure Email Alerts with the UI

Access the Email Alerts settings screen. First, left-click on the Settings tab, in the navigation bar at the left-hand side of Couchbase Web Console:

settingsTab

This brings up the main Settings screen. Now, access the Alerts panel, by means of the Alerts tab, located on the horizontal navigation bar, at the top:

emailAlertsTab

The Email Alerts panel now appears, as follows:

emailAlertsScreenInitial

Initially, its content is greyed out, and the user-interface components are inaccessible. To make the components accessible, use the Enable email alerts toggle, near the top of the panel:

enableEmailAlertsToggleOff

Switch the toggle to the right:

enableEmailAlertsToggleOn

The Email Alerts panel is now fully displayed, and the user-interface components are accessible. To establish an appropriate email-alerts configuration, first, enter appropriate data into the displayed fields at the left, using the data provided in the Email Settings table, immediately below. Then, proceed to Saving and Testing the Alert Configuration, further below.

Email Settings

Option Description

Email Server Host

The hostname of the SMTP server that will be used to send the email.

Port

The TCP/IP port to be used to communicate with the SMTP server. The default is the standard SMTP port 25.

Username

For email servers that require a username and password to send email, the username is used for authentication.

Password

For email servers that require a username and password to send email, the password is used for authentication.

Require encryption (TLS)

Enable Transport Layer Security (TLS) when sending the email through the designated server.

Sender Email

The email address identified as a source from which the email is sent. This email address should be one that is valid as a sender address for the SMTP server that you specify.

Recipients

A list of the recipients of each alert message. To specify more than one recipient, separate each address by a space, comma (,), or semicolon (;).

Send Test Email

Click Send Test Email to send a test email to confirm the settings and configuration of the email server and recipients.

Saving and Testing the Alert Configuration

When you have entered appropriate data into the fields, proceed as follows:

  1. Save the configuration, by left-clicking on the Save button, at the bottom of the screen:

    saveEmailAlertsConfiguration

    Note that when you left-click on Save, the password that you typed into the Password field becomes invisible, and the field therefore appears blank. This is a security measure imposed by Couchbase Server: the password remains valid, and will be used in authenticating with the email server.

    Alternatively, left-click on Cancel/Reset, to remove the configuration.

  2. Optionally, left-click on the Send Test Email button, to send a test email.

Available Alerts

The Available Alerts panel, at the right, provides a list of all available alerts, and allows you to select, by means of interactive checkboxes, the subset of alert messages that you wish to be sent. You can also select, by checking checkboxes, whether you wish the alert to be sent as Email, or displayed as a UI Popup, or both.

The listed alerts are are follows.

Alert Description Code

Node was auto-failed-over

The sending node has been failed over automatically.

auto_failover_node

Maximum number of auto-failed-over nodes was reached

The auto-failover system stops auto-failover when the maximum number of spare nodes available has been reached.

auto_failover_maximum_reached

Node wasn’t auto-failed-over as other nodes are down at the same time

Auto-failover does not take place if there is already a node down.

auto_failover_other_nodes_down

Node was not auto-failed-over as there are not enough nodes in the cluster running the same service

You cannot support auto-failover with less than three nodes.

auto_failover_cluster_too_small

Node was not auto-failed-over as auto-failover for one or more services running on the node is disabled

Auto-failover does not take place on a node as one or more services running on the node is disabled.

auto_failover_disabled

Node’s IP address has changed unexpectedly

The IP address of the node has changed, which may indicate a network interface, operating system, or other network or system failure.

ip

Disk space used for persistent storage has reached at least 90% of capacity

The disk device configured for storage of persistent data is nearing full capacity.

disk

Metadata overhead is more than 50%

The amount of data required to store the metadata information for your dataset is now greater than 50% of the available RAM.

overhead

Bucket memory on a node is entirely used for metadata

All the available RAM on a node is being used to store the metadata for the objects stored. This means that there is no memory available for caching values. With no memory left for storing metadata, further requests to store data will also fail.

ep_oom_errors

Writing data to disk for a specific bucket has failed

The disk or device used for persisting data has failed to store persistent data for a bucket.

ep_item_commit_failed

Writing event to audit log has failed

The audit log event writing has failed.

audit_dropped_events

Approaching full Indexer RAM warning

The indexer RAM limit threshold is approaching warning.

indexer_ram_max_usage

Remote mutation timestamp exceeded drift threshold

The remote mutation timestamp exceeded drift threshold warning.

ep_clock_cas_drift_threshold_exceeded

Communication issues among some nodes in the cluster

There are some communication issues in some nodes within the cluster.

communication_issue

Node’s time is out of sync with some nodes in the cluster.

The clock of this cluster-node needs to be synchronized with the clocks of other cluster-nodes.

time_out_of_sync

Disk usage analyzer is stuck; cannot fetch disk usage data

The disk usage worker is stuck and unresponsive.

disk_usage_analyzer_stuck

Memory usage threshold exceeded

System memory use as a percentage of total available memory has exceeded a threshold. Note that a warning-level alert is issued when system memory, as a percentage of total available memory, exceeds the warning threshold (90% by default). A critical-level alert is issued when system memory exceeds the critical threshold (95% by default).

memory_threshold

Configure Email Alerts with the CLI

To configure email alerts with the Couchbase CLI, use the setting-alert command, as follows:

couchbase-cli setting-alert -c 10.143.192.101 --username Administrator \
--password password --enable-email-alert 1 --email-user admin \
--email-password password --email-host mail.couchbase.com --email-port 25 \
--email-recipients user1@couchbase.com,user2@couchbase.com \
--email-sender noreply@couchbase.com --enable-email-encrypt 0 \
--alert-auto-failover-node --alert-auto-failover-max-reached \
--alert-auto-failover-node-down --alert-auto-failover-cluster-small \
--alert-memory-threshold

In this example, cluster 10.143.192.101 is accessed, with administor username and password specified. The enable-email-alert flag is specified as 1, enabling email alerts. Additional flags specify the username and password required by the mail server, as well as email host, port, recipients, and sender. The enable-mail-encrypt flag specifies encryption as off.

Additional flags are used to indicate which alerts should be sent. Note that every possible alert has a flag: if a flag is not specified, the corresponding alert will not be sent.

See Email Settings and Available Alerts, above, for descriptions of settings and alerts. See setting-alert for further information on using the CLI, including a full list of command-line parameters.

Configure Email Alerts with REST

To configure email alerts with the Couchbase REST API, use the /settings/alerts method, as follows:

curl -v -X POST http://10.143.192.101:8091/settings/alerts \
-u Administrator:password  \
-d 'emailPass=password' \
-d 'alerts=auto_failover_node,auto_failover_maximum_reached,auto_failover_other_nodes_down,auto_failover_cluster_too_small,memory_threshold' \
-d 'sender=noreply@couchbase.com' \
-d 'recipients=user1@couchbase.com,user2@couchbase.com' \
-d 'emailHost=mail.couchbase.com' \
-d 'emailPort=25' \
-d 'emailEncrypt=false' \
-d 'enabled=true'

This example demonstrates flags that specify mail-server password, sender, recipients, host, and port. Emails settings are enabled with the enabled flag; and encryption is specified as off, by means of the emailEncrypt flag. A list of the alerts that can be sent is provided as the value to the alerts flag. See the Code column of the Available Alerts table, above, for additional event-codes. See Email Settings, above, for a description of available email settings.

For more information on configuring alerts by means of the REST API, see Setting Alerts.